To help light up the nanoworld, a Cornell interdisciplinary team of researchers has produced microscopic "nanolamps" -- light-emitting nanofibers about the size of a virus or the tiniest of bacteria.
Craighead Research Group
An illustrated closeup of an electrospun fiber. During experimentation the organic devices gave off an orange glow.
In a collaboration of experts in organic materials and nanofabrication, researchers have created one of the smallest organic light-emitting devices to date, made up of synthetic fibers just 200 nanometers wide (1 nanometer is one-billionth of a meter). The potential applications are in flexible electronic products, which are being made increasingly smaller.
The fibers, made of a compound based on the metallic element ruthenium, are so small that they are less than the wavelength of the light they emit. Such a localized light source could prove beneficial in applications ranging from sensing to microscopy to flat-panel displays.
The work, published in the February issue of Nano Letters, was a collaboration of nine Cornell researchers, including first author José M. Moran-Mirabal, an applied physics Ph.D. student; Héctor Abruña, the E.M. Chamot Professor of Chemistry and Chemical Biology; George Malliaras, associate professor of materials science and engineering and director of the Cornell NanoScale Facility; and Harold Craighead, the C.W. Lake Jr. Professor of Engineering and director of the National Science Foundation-funded Nanobiotechnology Center.
Using a technique called electrospinning, the researchers spun the fibers from a mixture of the metal complex ruthenium tris-bipyridine and the polymer polyethylene oxide. They found that the fibers give off orange light when excited by low voltage through micro-patterned electrodes -- not unlike a tiny light bulb.
"Imagine you have a light bulb that is extremely small," said Malliaras, an organic materials expert. "Then you can use the bulb to illuminate objects that you wouldn't be able to see otherwise."
Craighead's research group, which focuses on nanostructures and devices, supplied the expertise on the electrospinning technique.
Craighead Research Group
Cornell researchers used the process of electrospinning, illustrated here, to create one of the smallest light-emitting devices to date. A voltage between a microfabricated tip and a substrate ejected a ruthenium-based solution from the tip, creating the thin fibers.
The technique, explained Moran-Mirabal, who works in Craighead's laboratory, can be compared with pouring syrup on a pancake on a rotating table. As the syrup is poured, it forms a spiraling pattern on the flat pancake, which in electrospinning is the substrate with micropatterned gold electrodes. The syrup would be the solution containing the metal complex-polymer mixture in solvent. A high voltage between a microfabricated tip and the substrate ejects the solution from the tip, Moran-Mirabal said, and forms a jet that is stretched and thinned. As the solvent evaporates, the fiber hardens, laying down a solid fiber on the substrate.
As scientists look for ways to innovate -- and shrink -- electronics, there is much interest in organic light-emitting devices because they hold promise for making panels that can emit light but are also flexible, said Moran-Mirabal.
"One application of organic light-emitting devices could be integration into flexible electronics," he said.
The research also shows that these tiny light-emission devices can be made with simple fabrication methods. Compared with traditional methods of high-resolution lithography, in which devices are etched onto pieces of silicon, electrospinning requires almost no fabrication and is simpler to do.
The durability of organic electronics is still under investigation, and this recently completed research is no exception, Craighead said.
"The current interest is in the ease with which this material can be made into very small light-emitting fibers," he said. "Its ultimate utility, I think, will depend on how well it stands up to subsequent processing and use."
Other co-authors on the work are graduate students Jason D. Slinker, John A. DeFranco, Scott S. Verbridge, Samuel Flores-Torres and CNF staff member Rob Ilic.